浮球式( 液位開關(guān) )的安裝方法介紹說明

The method of fixing the weight is, ** a small hammer to remove the snap ring, set the position of the cable, and the cable ends from the weight bell. Setting the snap ring on the cable will limit the position of a heavy hammer.
*After the cable is secured to the appropriate location outside the container.
*After the cable is secured to the appropriate location outside the container.
1 kW and 1 kw single phase pumps, the following key floating switches that can be directly connected in series in the circuit.
The length of the liquid level control (level switch) and the weight of the liquid at the position of the cable.
Fixed hammer, hammer removes the snap ring from the ** bell mouth, set the position of the cable, and wire the cable from the heavy hammer to the end of the clock. Setting the snap ring on the cable will limit the position of a heavy hammer.
Liquid high level switch, black, blue, low level switch, liquid level switch connection, drain, black, brown line, high level switch, liquid level control is through the cable length and weight of the cable in the cable s position.