新聞中心

【中英表】美國接頭標準(ANSI joint standards)

編號	中文名稱	英文名稱
ANSI B5.11-1964	多軸鉆頭用軸頭和可調接頭	Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads
ANSI J-STD-002-1992	元件引線、接線端、焊片、接頭和金屬絲的軟釬焊性試驗	Solderability tests for component leads, terminations, lugs, terminals and wires
ANSI PH3.101-1983	攝影(照相機).美國照相機用三角架接頭(1/4英寸-20牙)	Photography (Cameras) - Tripod Connections for American Cameras (1/4-Inch-20 Thread)
ANSI/API SPEC14L-2007	鎖緊心軸和落地螺紋接頭的規范	Specification for Lock Mandrels and Landing Nipples
ANSI/ASAE S366.2-2004	農業拖拉機和機械.一般用途快速液壓接頭	Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
ANSI/ASME A112.18.3-2002	泵固定件接頭中防回流裝置和系統的性能要求	Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
ANSI/ASME B107.2-2002	電動沖擊式延伸、接合及萬向接頭套筒扳手(英制)	Socket Wrenches, Extensions, Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series)
ANSI/ASME MFC-3Ma-2007	用孔板、管接頭和文杜利管測量管道中的液體流量	Measurement of Fluid Flow in Pipes Using Orifice, Nozzle and Venturi
ANSI/ASTM D2609-2002	聚乙烯塑料管塑料插入接頭規范	Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ANSI/ASTM D2672a-1996	使用溶解粘固劑的IPS PVC管用接頭規范	Specification for Joints for IPS PVC Pipe Using Solvent Cement
ANSI/ASTM D3138-2004	丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液狀粘固劑規范	Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
ANSI/ASTM D3212-2007	使用軟質人造橡膠密封料制塑料排水管和污水管用接頭的規范	Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ANSI/ASTM D5677-2005	用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型	Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ANSI/ASTM F1365-1991	采用柔性合成橡膠密封件的塑料地下管道接頭耐水滲透性試驗方法	Test Method For Water Infiltration Resistance Of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
ANSI/ASTM F1429-1999	用柔性合成橡膠密封件固定在套桶中的塑料地下管道接頭組合力試驗方法	Test Method For Assembly Force Of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located In The Bell
ANSI/ASTM F1986-2001	冷熱飲用水系統用2型多層管壓合配件和壓合接頭的規范	Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-water Systems
ANSI/ASTM F1987-2001	循環加熱系統用2型多層管、壓合配件和壓合接頭的規范	Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
ANSI/ASTM F2014-2000	管道非增強擠制T形接頭規范	Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ANSI/ASTM F2634-2007	用拉力沖擊法的聚乙烯(PE)熔接接頭的實驗室測試用試驗方法	Test Method for Laboratory Testing of Polyethylene(pe) Butt Fusion Joints Using Tensile-impact Method
ANSI/ASTM F682a-1982	鍛制碳素鋼套管接頭規范	Specification for Wrought Carbon Steel Sleeve-type Pipe Couplings
ANSI/ASTM F704-1997	管道系統法蘭接頭用螺栓長度的選用慣例	Practice for Selecting Bolting Lengths for Piping System Flanged Joints
ANSI/ASTM F722-1982	船上管道系統用焊接接頭規范	Specification for Welded Joints for Shipboard Piping Systems
ANSI/ASTM F905-2004	聚乙烯鞍形熔融接頭合格鑒定的實施規范	Practice for Qualification of Polyethylene Saddle Fusion Joints
ANSI/AWS C3.2M/C 3.2-2008	評定硬釬焊接頭強度的標準方法	Standard Methods for Evaluating the Strength of Brazed Joints
ANSI/AWS D14.4/D 14.4M-2005	機械和設備焊接接頭規范	Specification for Welded Joints in Machinery and Equipment
ANSI/AWWA C111-2006	韌性鑄鐵壓力管和配件的橡膠墊接頭	Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
ANSI/CSA LC7-2009	管接頭密封化合物和材料	Pipe Joint Sealing Compounds and Materials
ANSI/EIA 364-07B-1998	電連接件.壓合接頭變形試驗程序	Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI/EIA 5150000-1986	光學纖維和光纜接頭的一般規范	Generic Specification for Optical Fiber and Cable Splices
ANSI/EIA 540ABAA-1991	引線間隙為0.635mm(0.25英寸)的塑料方形平接頭用片載插孔的詳細規范	Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing)
ANSI/EIA 540ADAA-1992	電子設備用針狀格子排列插孔的適配器-載體方形平接頭的詳細規范	Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for
ANSI/EIA 677-1997	小型電源接頭銷尺寸規范	Specification for Small Form Factor Power Connector Pin Dimensions
ANSI/EIA-364-93-2009	電氣連接器用絕緣置換觸點(IDC)的重復線接頭和斷開試驗程序	Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ANSI/IEEE 1511-2004	額定電壓為5kV至46 kV的系統上電力電纜、接頭和終端故障的調查和分析指南	Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV
ANSI/IEEE 404-2006	額定電壓為2500-500000V的擠壓介質電纜接頭和層壓介質電纜接頭	Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500 V - 500 000 V
ANSI/IEEE 592-2007	高壓電纜接頭和可拆分連接器用暴露半導體護套的標準	Standard for Exposed Semiconducting Shields on High Voltage Cable Joints and Separable Connectors
ANSI/ISO 5675-1992	農業拖拉機和機械.一般用途快速液壓接頭	Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
ANSI/SAE J1036-1993	農用拖拉機圓柱形液壓系統管接頭的尺寸標準	Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors
ANSI/SAE J512-1994	汽車管接頭	Fittings, Automotive Tube
ANSI/SAE J513-1994	制冷用管接頭(ANSI/SAE J513F的修訂版)	Refrigeration Tube Fittings
ANSI/SAE J518-1993	四螺栓拼合法蘭型液壓法蘭管、管道及軟管接頭	Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
ANSI/SAE J530-1994	汽車管件接頭	Automotive Pipe Fittings
ANSI/SCTE 116-2006	5/8-24端口、內螺紋接頭的規范	Specification for 5/8-24 Port, Female Adapters
ANSI/SCTE 59-2003	電介質接頭上的中心對接	Center Conductor Bond to Dielectric Bond
ANSI/TIA-455-8-2000	使用光時域反射計(OTDR)測量接頭損耗或連接器損耗和反射比	Measurement of Splice or Connector Loss and Reflectance Using an OTDR
ANSI/TIA/EIA 102BAAA-1-1999	項目25， FDMA共用氣體管道接頭，補充件1	Project 25 FDMA Common Air Interface Addendum 1
ANSI/UL 181-2008	工廠制通風管和通風管接頭的安全標準	Standard for Safety for Factory-Made Air Ducts and Air Connectors
ANSI/UL 181B-2008	與柔性風管和風管接頭一起使用的密閉系統的安全標準	Standard for Safety for Closure Systems for Use With Flexible Air Ducts and Air Connectors
ASME B16.29-2001	DWV類可鍛銅和可鍛銅合金釬焊連接排水管接頭	(Wrought copper and wrought copper alloy solder joint drainage fittings - DWV)
ASME B16.39-1998	可鍛鐵螺紋管活接頭:等級150、250和300	(Malleable iron threaded pipe unions; Classes 150, 250, and 300)
ASME MFC-3M Errata-1990	用孔板,管接頭和文丘里管測量管道中的流量.正誤表	(Measurement of fluid flow in pipes using orifice, nozzle, and Venturi; Errata)
ASME MFC-3M-1989	用孔板,管接頭和文丘里管測量管道中的液體流量.	(Measurement of fluid flow in pipes using orifice, nozzle, and Venturi)
ASTM A865/A865M-2006	鋼管連接用黑色或鍍鋅(電鍍)焊接或無縫鋼螺紋接頭標準規范	Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
ASTM B687-1999(2005)e1	鍍黃銅、鍍銅和鍍鉻管接頭標準規范	Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
ASTM C443M-2007	用橡膠墊圈(米制)的混凝土管道和檢修孔用接頭的標準規范	Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
ASTM C505-2005a	帶橡膠墊圈接頭的無鋼筋混凝土灌溉水管標準規范	Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C505M-2005a	帶橡膠墊圈接頭的無鋼筋混凝土灌溉水管標準規范(米制)	Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
ASTM D1101-1997a(2006)	室外用層壓結構木制品的膠合接頭完整性的標準試驗方法	Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D2855-1996(2002)	聚氯乙烯管和配件的溶劑粘固接頭制作的標準實施規程	Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
ASTM D2918-1999(2005)	受撕裂應力的膠粘接頭耐用性的標準試驗方法	Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D3138-2004	丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液態粘結劑的標準規范	Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
ASTM D3164-2003	用拉伸負荷法測定膠粘劑粘接塑料搭接接頭剪切強度特性的標準試驗方法	Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3164M-2003	用拉伸負荷法測定膠粘劑粘接塑料搭接接頭剪切強度性能的試驗方法(米制)	Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3212-2007	使用彈性柔性密封料制塑料排水管和污水管用接頭的標準規范	Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D3433-1999(2005)	粘結接頭中膠粘劑的斷裂強度的標準試驗方法	Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3632-1998(2004)	用氧壓法加速粘結接頭老化的試驗方法	Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D4161-2001(2005)	使用撓性彈性體密封件的"玻璃鋼"(玻璃纖維增強熱固樹脂)管接頭標準規范	Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D4502-1992(2004)	木材粘結接頭耐熱和耐水性的標準試驗方法	Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
ASTM D5249-1995(2006)	硅酸鹽水泥混凝土和地瀝青接頭加熱和制冷接縫密封膠襯墊材料的標準規范	Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
ASTM D5656-2004e1	拉伸載荷法測定剪切中膠粘劑應力-應變性能用厚被粘物金屬搭接-剪切接頭的標準試驗方法	Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D6383-1999(2005)	由EPDM屋頂膜材料制造的膠粘劑接頭的失效時間(蠕變破裂)的標準操作規程	Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D7174-2005	混凝土面層和結構建造用預制閉孔聚烯烴伸縮接頭填充料的標準規范	Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM E677-1994(2004)	可互換的圓球形接頭	Standard Specification for Interchangeable Spherical Ground Joints
ASTM F1674-2005	與PVC管一起使用的接頭約束裝置的標準試驗方法	Standard Test Method for Joint Restraint Products for Use with PVC Pipe
ASTM F1986-2001(2006)	冷熱飲用水系統用2型多層管、壓合配件和壓合接頭的標準規范	Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
ASTM F2014-2000(2006)	管道系統用非增強擠制T形接頭標準規范	Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ASTM F2634-2007	通過拉力沖擊法實驗室測試聚乙烯(PE)熔接接頭的用標準試驗方法	Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM F905-2004	聚乙烯鞍形熔融接頭的合格證明的標準實施規程	Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
IEEE 404-2000	額定電壓2500V-500000V的擠壓和層壓介質鎧裝電纜接頭	(Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V)
IEEE 592-1990	高壓電纜接頭和可分離絕緣連接器的外露半導體護套	(Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors)
UL 1363-1996	重新配置的臨時電源接頭	(Relocatable temporary power taps )
UL 194-1996	防火用球墨鑄鐵和灰鑄鐵壓力管和配件加墊圈的接頭	(Gasketed joints for ductile-iron pipe and fittings for fire protection service )
UL 218A-2004	柴油機中驅動離心點火泵用電池接頭標準	(Standard for battery contactors for use in diesel engines driving centrifugal fire pumps )
UL 310-2003	電氣快速聯接接頭	(Electrical quick-connect terminals)
UL 498A-1999	電流分接頭和適配器	(Current taps and adapters )
UL 860-2001	易燃和可燃流體與消防用管接頭	(Pipe unions for flammable and combustible fluids and fire-protection service )
編號	中文名稱	英文名稱